Skip to content
Smythy
Calculators
← Electrical calculators

Electrical inspection report builder

Record the inspection scope, observed findings and measured test results. Save a draft on this device and print or save your report as a PDF. Free, with no account.

This is an inspection record completed by the person carrying out the work. It does not perform an inspection, determine compliance or issue an official electrical safety certificate.

Report details

Inspection observations

These headings follow the scope, visual inspection and testing structure used in the product's inspection workflow. Mark anything you did not assess as Not inspected; enter the actual findings.

Switchboard and circuit protection

Main earthing and bonding

Wiring, socket-outlets and equipment

RCD observations and testing

Other parts included in the inspection

Measured test results

Enter the circuit, test name, measured value with units, instrument reference and your assessment. Blank tests are omitted. This tool does not calculate a pass or fail.

Report entries stay in this tab unless you explicitly save a local draft or print. Local drafts remain on this browser until removed. Avoid identifying information on shared devices.

Choosing the correct report

This general record is suitable for documenting what was inspected and measured. Requirements differ by jurisdiction and purpose. For Victorian rental safety checks, consult the Energy Safe Victoria form and worked example. This builder is not that official form.

How to save the report

Complete the details, preview the report, then choose Print / save PDF. Your browser controls the PDF destination. Review every page before providing it to someone else. Remove any saved local draft when using a shared device.

For design-aid calculations, use the circuit worksheet or fault-loop calculator. Calculated estimates and measured inspection results should be recorded distinctly.